CS700 Analog audio drop outs

CS750 Analog audio drop outs

I have a CS750 that was upgraded from a CS700.  Ever since it has been a CS750 now using the latest firmware there are random audio dropouts when monitoring an analog channel.  It sounds like there is a scan priority enabled but I have none of those items enabled and it will happen when parked on a channel with scan turned off.  It is random in timing also, it will receive well for a minute or two sometimes with no drop outs then it will start with the drop outs every 5-10 seconds.  Anyone else experiencing symptoms like this?



Amateur Radio Users Support Group
AmateurRadio@groups.io
https://groups.io/g/AmateurRadio 



Connect Systems
https://groups.io/g/ConnectSystemsDMR





1 comment:

  1. Anonymous3/31/2016

    I had the same problem with a CS700, after upgrading to CPS V 1.19. Set Priority Channel 1 & 2 to "selected" (I believe, it's blank in your CP). This solved the problem.

    ReplyDelete

Thanks for your comments, Comments may take a day to show up

Used for discussions, it is a collaboration group

Digital Ham Radio / Amateur Radio
DigitalHamRADIO@groups.io
https://groups.io/g/DigitalHamRADIO

Amateur Radio Users Support Group
AmateurRadio@groups.io
https://groups.io/g/AmateurRadio

North America Amateur Frequencies
A shared discussion about North America Frequencies.
https://groups.io/g/Frequency
.

Note: only a member of this blog may post a comment.