DMR_BUG_List_V1.027_PC1.19.xls
.
| NO. | Firmware Version | Serious Degree | Description | Reason | Modified Version | Remark |
| 1 | D001.017 | A（Highest） | Talk Around does not work at all (Both Analog and Digital) | Software(s/w) Bug | D001.019 | Refer to Difference with MOTO |
| 2 | A | The radio may possible enter a dead status after being idle state over 6 hours, need to fetch out the batter to reset the radio. | s/w Bug | D001.021 | ||
| 3 | A | Some commands can not be passed by repeater,such as kill/revive | s/w Bug | D001.023 | ||
| 4 | B+ | The radio will reset after receving some message but not belong to itself. | s/w Bug (Receive Buffer Overflow) | D001.025 | ||
| 5 | B+ | The encryption voice cannot be passed by the repeater. | s/w Bug | D001.025 | ||
| 6 | B+ | Seldom cannot power on/off the radio after programming, you have to fetch out the battery to reset the radio. | s/w Bug | |||
| 7 | B+ | High frequency CTCSS over 200Hz, especially 254.1Hz decode chopping when the transmitting frequency near 300Hz. | s/w | |||
| 8 | B+ | TX/RX activity has the highest priority to cancle or prohibit the menu | Need to change the way to keep/recover the menu operation | |||
| 9 | B | If enabled "Power On Password", you should key in 8 digits from 1 to 9. | s/w Bug | D001.021 | Note: eight '0' will be regarded as no password | |
| 10 | B | The CTCSS/DCS tail elimination is not good when CTCSS over 200Hz, and even worse when using the earpiece. | Mainly s/w algorithm | D001.023 | Improved, but not fully | |
| 11 | B | Voice annuncication noise,especially on analog channel | Need to change the way to generate voice | |||
| 12 | B | If enabled "Talk Premit Tone"， the receiver will hear this voice | s/w Bug | D001.021 | Still a short voice can be heard in the reciver | |
| 13 | B | Only hear one beep alert after receiving the Message | s/w | |||
| 14 | B | Channel revert is not very quick while scanning land on | s/w | D001.023 | Improved | |
| 15 | B | Number Key(0-9) Quick Contact Access, can be edited and saved BUT cannot be used. | s/w (Add this feature in later version) | D001.021 | ||
| 16 | B | No 'save ?' reminder when exit a new private call | s/w (Add this feature in later version) | |||
| 17 | B | DTMF signaling not avaialbe now | s/w (Add this feature in later version) | |||
| 18 | B | If message sending failed, no remark for the success or failure | s/w (Add this feature in later version) | |||
| 19 | B | No Emergency LCD display | s/w (Add this feature in later version) | D001.019 | ||
| 20 | B | USB not stable | s/w Bug | D001.023 | Much improved, by adding MCU Idle control | |
| 21 | C | Private Calls always enabled | s/w (Add this feature in later version) | |||
| 22 | C | The digit numberof maual dial in contact list is not limit to 24 bits | s/w (Add this feature in later version) | D001.019 | ||
| 23 | C | No voice annunciation alert for battery level | s/w (Add this feature in later version) | |||
| 24 | ||||||
| 25 | Add Chinese menu | D001.021 | ||||
| 26 | A | DTMF deviation was too big | s/w decrease the deviation | D001.026/027 | 1.026 for Non LCD version; 1.027 for LCD version ; Also support VHF from these versions. |
